Leave Your Message

Hydroelectric power station temperature sensor

Movable thread bushing platinum resistance temperature sensor, suitable for temperature measurement and control in small and bending places. It is a temperature measuring device for industrial bearing, wind power station, chemical fiber, pharmaceutical and other industries.

    Features

    1. Low thermal response time, reducing dynamic error;
    2. Flexible installation and use;
    3. Large temperature measurement range;
    4. High mechanical strength, good pressure resistance;
    5. German imported components, high sensitivity and high precision;
    6. Rapid response, stable temperature measurement;
    7. Water, oil and corrosion resistant.

    Application

    Movable thread bushing platinum resistance temperature sensor can be used inIndustrial bearing, wind power station, chemical fiber, pharmaceutical and other industries.

    Installation and Use

    When it is used to measure the bearing temperature of the motor, first install the sensor junction box in the appropriate position of the motor, tighten the connection screw, and connect the ground wire.
    Insert the temperature sensing element (probe) of the sensor into the screw hole near the motor bearing (such as the motor housing, the shaft housing bore), and tighten the mounting nut.
    Open the junction box of the sensor, connect the leading cable, cover the box, connect the leading cable to the designated place and connect with the intrinsic safety secondary instrument.
    When installing leads, fix them with a tie head at an interval of 300mm. The bending radius of the spring tube is not less than 60mm. If the lead is too long, hang it in an appropriate place with a coil, and keep it away from the heating device.
    Bearing temperature (also can measure solid, liquid, gas temperature) temperature sensor, the measuring element is Pt100 platinum thermal resistance, equipped with the appropriate thermometer, can monitor the bearing temperature and can achieve alarm and control.

    Parameters

    Item

    Parameter and description

    Temperature coefficient

    TK=3850ppm/k

    Self-heating coefficient

    0.4K/mW

    accuracy class

    Class 1/3BT0℃≤0.10℃0~150℃

    Class A   T0℃≤0.15℃-50~300℃

    Class B   T0℃≤0.30℃-200~500℃

    Working current

    100Ω0.3~1mA

    500Ω0.1~0.7mA

    1000Ω0.1~0.3mA

    Insulation resistance

    ≥100MΩ@500V&20℃

    Withstand voltage standard

    ≥0.5MPa

    Service current

    ≤1mA

    Product Types Choosing

    Division number

    PT100PT1000

    Accuracy level

    1/3B level; A = A level; B = B level

    Temperature range

    L=-200℃~+200℃M=-70℃~+300℃H=0℃~+500℃

    Electrical definition

    two -line system; three -line system; four -line system

    Cable specification

    0.08mm²0.12mm²0.20mm²0.35mm²0.50mm²0.75mm²

    Cable material

    fep; silicon rubber; ptfe; pvc; metal woven high temperature line

    Cable color

    transparent; red; white; black; blue;yellow; transparent red; gray; brown; green

    Electrical connections

    U -shaped terminal; O -type terminal; needle -type terminal;

    Multi -core connector; (Unbelled: Default conductor soaked tin)

    Cable length

    any length

    Exterior diameter

    any length

    Sense of probe

    any length

    Product Structure Diagram